Safety Data Sheets
A Safety Data Sheet (SDS), formerly known as an MSDS, is a document that instructs emergency responders and users of hazardous compounds on how to handle and deal with a specific substance.
Construction Sites’ Most Serious Safety Risks
Approximately 20% of deaths in the private sector occur in the construction business. Construction also has a higher fatal injury rate than the national average for all industries in the same category. However, many projects may avoid the majority of the incidents with sufficient TRAINING and equipment, which are tragically lacking. The following are the major safety concerns for construction workers and mitigation.
Chemical Burns and Respiratory Issues
Chemicals can induce chemical burns and respiratory issues. They can also cause fires and explosions, injuring personnel severely.
- For each chemical used during construction, provide Safety Data Sheets (SDS). This information must be available to all employees clearly and understandably.
- They are handling hazardous substances according to SDS instructions.
- Learn about the hazards of each chemical and make sure your employees are aware of them.
- In areas where chemicals are present, spill cleanup kits are essential.
- Provide spill-control plans as well as cleanup training.
- Must require Personal protection equipment (PPE).
Falling objects can cause serious head injuries if not properly protected. These are frequently lethal or result in long-term disability.
Solution: To avoid injuries from falling objects, bumping with fixed objects, and accidental head contact with electrical risks, all workers should wear hard hats.
Falls are the leading cause of fatalities in the construction sector, and they can occur for various reasons. Falls happen due to various factors, including unstable working surfaces, the misuse of fall protection devices, and human mistakes. Can avoid many injuries and deaths using safety equipment such as nets and fall arrest devices.
- Elevated platforms and aerial lifts give a safer elevated working surface.
- I am using body harnesses and safety net systems.
- To avoid falling, control line and guardrail systems with toe boards do install.
- We are covering the holes in the floor.
Hazards of Ladders and Stairways
Ladders and stairways are responsible for roughly 24,882 injuries and 26 fatalities per year in the construction industry.
Solutions: Ladders come in various shapes and sizes, so make sure you’re using the correct one for the job.
Inspect ladders for structural damage, split or bent side rails, broken steps or other accessories, oil or filth that could cause slipping, and so on. Never load a ladder above its maximum load limit.
Falls are more frequent when scaffolds do not properly erect or operate. Workers can save roughly 4,500 injuries and 50 fatalities each year if they do protect against scaffold-related mishaps.
Must build scaffolds on a firm foundation. The scaffold shall not make barrels, boxes, bricks, or blocks. Guardrails, mid-rails, and toe boards are all required.
When braces, brackets, trusses, screw legs, and ladders do break, they must replace or repair.
A competent person must supervise the inspection and the use of the scaffold.
Must inform employees about the proper scaffolding safety procedures and rules.